How to Upload Files to Mintion Lasercam
Update: 2023-08-17
This guide provides step-by-step instructions on how to upload files to your lasercam.
Why Upload Files to Mintion Lasercam?
1. The engraving/cutting file started by Mintion laser camera can remotely monitor the engraving/cutting progress.
2. Through the engraving/cutting file started by Mintion laser camera, the video in "Normal Timelapse Video" or "Clean Timelapse Video" mode can be generated.
3. Note:support to upload the gcode file(.gcode, .gco, .gc, .g, .nc )
How to Upload Files to Mintion Lasercam
BeagleEngrave APP
2. Click on the file icon at the bottom of the screen, then click the "+" icon on the right side of the file list.
3. Select the file from your mobile device or from a network drive such as Google Drive. After selecting the file, click "Done".
4. You will see a file name and an upload progress bar with the upload percentage.
5. After the file is successfully uploaded, you will see the file name, upload time, file size information, and the icons for "Frame", "Engraving/Cutting", and "Delete File".
Your heading text goes here
1. Enter the Camera's IP address in any browser in same LAN to access BeagleEngrave web.
2. Click on the "Dashboard" text box on the left, then select "Files List".
3. Click the "Upload" button, then navigate to the file you want to upload, select it, and click "Open".
4. You will see a file name and an upload progress bar with the upload percentage.
5. After the file is successfully uploaded, you will see the file name, upload time, file size information, and the icons for "Download", "Delete File", "Load File", "Frame", and "Start Engraving/Cutting".
Note: If your camera is not connected to the engraving machine, the icons for "Frame" and "Start Engraving/Cutting" will be grayed out and unselectable.