How to Connect the Beagle Camera(V1&V2) to Klipper Printer
Update: 2024-05-20
1. The Way to Connect Beagle Camera (V1&V2) with Klipper Printer.
1.1. When connect to Klipper printer, the camera only needs to be plugged in with the power cord. Please do not use USB cable to connect camera and Klipper printer.
1.2. Please do not connect in the browser management page that comes with the camera.
2. Use the APP: Beagleprint to connect the beagle camera and Klipper Printer (take Elegoo Neptune 4 Plus as an example)
2.1. Power on the printer, and then find the printer IP address information on the printer control screen.
2.2. Power on the camera and set the printer model in the APP. Enter the printer model and IP address information, then click"Save"
2.3. After saving the printer settings, click "connect"
Note:
1.The camera needs to be in the same LAN as the Klipper printer.
2. If the camera cannot connect to the printer after following the above steps, please restart the camera and APP, and then click "connect" again.
3. The printer IP address information entered in the APP needs to be consistent with what is displayed on the printer control screen. Do not add other characters.
4. For Klipper printers using the Creality sonic pad or Raspberry Pi .etc.. (multi-serial management devices), you need to find the printer's specific IP address information on the printer's Web page.
Here is the 25% discount for Beagle V2 Camera: BEAGLE2CAM
3. Add the Beagle Camera(V1&V2) to Mainsail/Fluidd?
3.1. Fluidd
3.1.1. Please find the Webcams category in Settings and click "Add Webcam".
3.1.2: After entering the camera IP address, click "Save" to add the beagle camera(V1&V2)
Name: Custom camera name (such as "BeagleCamera")
Stream type: MJPEG Stream (this type requires the video to be an MJPG stream)
Camera Url: http://192.168.0.82/ipcam/mjpeg.cgi
*Please note that you need to replace "192.168.0.82" with your own beagle camera IP address.
For more details on setting items, please view Fluidd official documentation (https://docs.fluidd.xyz/features/cameras).
3.2. Mainsail
3.2.2: After entering the camera IP address, click "Save" to add the beagle camera(V1&V2)
Camera Url Stream: http://192.168.2.92/ipcam/mjpeg.cgi
Camera Url Snapshot: http://192.168.2.92/images/snapshot0.jpg
*Please note that you need to replace "192.168.2.92" with your own beagle camera IP address.
For more details on setting items, please view Mainsail official documentation (https://docs.mainsail.xyz/overview/settings/webcams).